| 期刊論文 |
| 1. |
Y. S. Lai, X. Y. Wu and Y. Y. Huang, “New Seamless Switching Control Technique between CCM and DCM for Boost PFC without Additional Zero Crossing Point Sensing Circuit,” IEEE Trans. On Industrial Electronics, 2024. |
| 2. |
Z. H. Qiu and Y. S. Lai, “New On-Line MTPA Angle Search and Control Methods Based on Digital Twins for IPM Synchronous Motor Drives Considering Motor Non-Linearity,” IEEE Access, Vol. 11, 2023. |
| 3. |
Y. Y. Huang and Y. S. Lai, “Optimal Inductor Design Method for GaN-Based PFC,” IEEE Access, Vol. 11, 2023. |
| 4. |
C. K. Lin, C. A. Agustin, J. T. Yu, Y. S. Cheng, F. M. Chen, and Y. S. Lai, "A Modulated Model-Free Predictive Current Control for Four-Switch Three-Phase Inverter-Fed SynRM Drive Systems,” IEEE Access, Dec., 2021. |
| 5. |
C. A. Agustin, J. T. Yu, Y. S. Cheng, C. K. Lin, H. Q. Huang, and Y. S. Lai, “Model-Free Predictive Current Control for SynRM Drives Based on Optimized Modulation of Triple-Voltage-Vector," IEEE Access, September, 2021. |
| 6. |
W. S. Chen and Y. S. Lai, “Module-Based Laboratory Course for the Industry Sponsored Research and Design Master Program,” IEEE Access, July, 2021.
|
| 7. |
C. A. Agustin, J. T. Yu, C. K. Lin, J. Jai and Y. S. Lai, “Triple-Voltage-Vector Model-Free Predictive Current Control for Four-Switch Three-Phase Inverter-Fed SPMSM Based on Discrete-Space-Vector Modulation,” ” IEEE Access, April, 2021.
|
| 8. |
Y. S. Lai and M. H. Yu, "On-line Auto-tuning Technique of Switching Frequency for Resonant Converter Considering Resonant Components Tolerance and Variation," IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 6, No. 4, pp. 2315 – 2324, 2018. |
| 9. |
C. K. Lin, J. T. Yu, H. Q. Huang, J. T. Wang, H. C. Yu, and Y. S. Lai, "A Dual-Voltage-Vector Model-Free Predictive Current Controller for
Synchronous Reluctance Motor Drive Systems," Energies, Vol. 11, No. 7, July 2018. |
| 10. |
C. J. Hsu and Y. S. Lai, "Novel On-Line Optimal Bandwidth Search and Auto Tuning Techniques for Servo Motor Drives," IEEE Trans. on Industry Applications, Vol. 53, No. 4, pp.3635-3642, 2017. |
| 11. |
Y. S. Lai, C. K. Lin, F. P. Chuang, and J. T. Yu, "Model-Free Predictive Current Control for Three-Phase AC/DC Converters," IET Electrical Power Application, Vol. 11, No. 5, pp. 729–739, 2017. |
| 12. |
C. K. Lin, J. T. Yu, Y. S. Lai, H. C. Yu, and C. I. Peng, "Two-vector-based Modeless Predictive Current Control for Four-switch Inverter-fed Synchronous Reluctance Motors Emulating the Six-switch Inverter Operation," IET Electronics Letter, Vol. 52, No.14, pp.1244-1246, 2016. |
| 13. |
C. K. Lin, J. T. Yu, Y. S. Lai, and H. C. Yu, "Improved Model-Free Predictive Current Control for Synchronous Reluctance Motor Drives," EEE Trans. on Industrial Electronics, Vol. 63, No. 6, pp. 3942 – 3953, 2016. |
| 14. |
C. K. Lin, J. T. Yu, Y. S. Lai, H. C. Yu, Y. H. Lin and F. M. Chen, “Simplified Model-Free Predictive Current Control for Interior Permanent Magnet Synchronous Motors,” Electronics Letters,Vol. 52, No. 1, pp. 49 - 50, 2016. |
| 15. |
Y. S. Lai and Z. J. Su, "New Integrated Control Technique for Two-Stage Server Power to Improve Efficiency under Light Load Condition," IEEE Trans. on Industrial Electronics, Vol. 62, No. 11, pp. 6944 - 6954, 2015. |
| 16. |
Y. S. Lai, Z. J. Su and Y. T. Chang, "Novel Phase-Shift Control Technique for Full-Bridge Converter to Reduce Thermal Imbalance under Light-Load Condition," IEEE Trans. on Industry Applications, Vol. 51, No. 2, pp. 1651-1659, 2015. |
| 17. |
Y. S. Lai and K. M. Ho, "Novel On-Line Parameter Tuning Method for Digital Boost PFC with Transition Current Mode," IEEE Trans. on Industry Applications, Vol. 40., No. 4, pp. 2719-2727, 2014. |
| 18. |
Y. S. Lai, Z. J. Su and W. S. Chen, "New Hybrid Control Technique to Improve Light Load Efficiency while Meeting the Hold-up Time Requirement for Two-Stage Server Power," IEEE Trans. on Power Electronics, Vol. 29, No.9, pp. 4763-4775, 2014. |
| 19. |
Y. S. Lai and Z. J. Su, "Novel On-Line Maximum Duty Point Tracking Technique to Improve Two-Stage Server Power Efficiency and Investigation into its Impact on Hold-up Time," IEEE Trans. on Industrial Electronics, Vol. 61, No. 5, pp. 2252 - 2263, 2014. |
| 20. |
Y. S. Lai, W. T. Lee, Y. K. Lin and J. F. Tsai, "Integrated inverter/converter circuit and control technique of motor drives with dual mode control for EV/HEV applications," IEEE Trans. on Power Electronics, Vol. 29, No. 3, pp. 1358-1365, 2014. |
| 21. |
Y. S. Lai and B. Y. Chen, "New random PWM technique for full-bridge DC/DC converter with harmonics intensity reduction and considering efficiency," IEEE Trans. on Power Electronics, Vol. 28, No. 11, pp. 5013 - 5023, 2013. |
| 22. |
B. Y. Chen and Y. S. Lai, "Corrections to Switching control technique of phase-shift controlled full bridge converter to improve efficiency under light load and standby conditions without additional auxiliary components," IEEE Trans. on Power Electronics, Vol. 28, No. 8, pp. 4120, August 2013. |
| 23. |
Y. S. Lai, Y. T. Chang and B. Y. Chen, "Novel random switching PWM technique with constant sampling frequency and constant inductor average current for digital-controlled converter," IEEE Trans. on Industrial Electronics,Vol. 60, No. 8, pp. 3126-3135, 2013. |
| 24. |
Y. S. Lai, Y. K. Lin and C. W. Chen, "New hybrid pulse-width modulation technique to reduce current distortion and extend current reconstruction range for three-phase inverter using only DC-link sensor," IEEE Trans. on Power Electronics, Vol. 28, No. 3, pp. 1331 – 1337, 2013. |
| 25. |
Y. S. Lai and C. A. Yeh, "Authors' reply to comments on predictive digital-controlled converter with peak current-mode control and leading-edge modulation", IEEE Trans. on Industrial Electronics, Vol. 60, No. 1, pp. 235-238, 2013. |
| 26. |
Y.S. Lai, C. A. Yeh and K. M. Ho, "A family of predictive digital-controlled PFC under boundary current mode control," IEEE Trans. on Industrial Informatics, Vol. 8, No. 3, pp. 448 - 458, 2012. |
| 27. |
P. Y. Lin and Y. S. Lai, "Voltage control technique for the extension of DC-link voltage utilization of finite speed SPMSM drives," IEEE Trans. on Industrial Electronics, Vol. 59, No. 9, pp. 3392-3402, 2012. |
| 28. |
B. Y. Chen and Y. S. Lai, "New digital-controlled technique for battery charger with constant current and voltage control without current feedback," IEEE Trans. on Industrial Electronics, Vol. 59, No. 3, pp. 1545 – 1553, 2012. |
| 29. |
C. A. Yeh and Y. S. Lai,“Digital pulse-width modulation technique for a buck DC/DC converter to reduce switching frequency,”IEEE Trans. on Industrial Electronics, Vol. 59, No. 1, pp. 550-561, 2012. |
| 30. |
Y. K. Lin and Y. S. Lai, “Pulse-width modulation technique for BLDCM drives to reduce commutation torque ripple without calculation of commutation time,” IEEE Trans. on Industry Applications, Vol. 47, No. 4, pp. 1786-1793, 2011. |
| 31. |
Y. S. Lai and Y. K. Lin, "A unified approach to zero-crossing point detection of back-EMF for brushless DC motor drives without current and hall sensors,"IEEE Trans. on Power Electronics, Vol. 26, No. 6, pp. 1704-1173, 2011. |
| 32. |
P. Y. Lin and Y. S. Lai, " Novel voltage trajectory control for field weakening operation of induction motor drives," IEEE Trans. on Industry Applications, Vol. 47, No. 1, pp. 122-127, Jan. 2011. |
| 33. |
K. M. Ho, C. A. Yeh and Y. S. Lai, "Novel digital-controlled transition current mode control and duty compensation techniques for interleaved power factor corrector," IEEE Trans. on Power Electronics, Vol. 25, No. 12, pp. 3085 - 3094, Dec. 2010. |
| 34. |
P. S. Chen and Y. S. Lai, “Effective EMI filter design method for three-phase inverter based upon software noise separation,”IEEE Trans. on Power Electronics, Vol. 25, No. 11, pp. 2797 - 2806, 2010. |
| 35. |
L. R. Chen, C. S. Tsai, Y. L. Lin and Y. S. Lai, ”A biological swarm chasing algorithm for tracking the PV maximum power point,” IEEE Trans. on Energy Conversion, Vol. 25, No. 2, pp. 484-493, June 2010. |
| 36. |
B. Y. Chen and Y. S. Lai, “Switching control technique of phase-shift controlled full bridge converter to improve efficiency under light load and standby conditions without additional auxiliary components,” IEEE Trans. on Power Electronics, Vol. 25, No. 4, pp. 1001-1012, April 2010. |
| 37. |
Y. T. Chang and Y. S. Lai, “Parameter tuning method for digital power converter with predictive current mode control,” IEEE Transactions on Power Electronics, Vol. 24, No. 12, pp. 2910-2919, Dec. 2009. |
| 38. |
K. Y. Lee and Y. S. Lai, "Novel circuit design for two-stage AC/DC converter to meet standby power regulations," IET Power Electronics, Vol. 2, No. 6, pp. 625-634, Nov. 2009. |
| 39. |
Y. T. Chang and Y. S. Lai, “On-line parameter tuning technique for predictive current mode control operating in boundary conduction mode,” IEEE Trans. on Industrial Electronics, Vol. 56, No. 8, pp. 3214-3221, Aug. 2009. |
| 40. |
Y. S. Lai and C. A. Yeh, “Predictive digital-controlled converter with peak current mode control and leading edge modulation,” IEEE Trans. on Industrial Electronics, Vol. 56, No.6, pp.1854-1863, 2009. |
| 41. |
Y. K. Lin and Y. S. Lai, “Dead-time elimination of PWM-controlled inverter/converter without separate power sources for current polarity detection circuit,” IEEE Trans. on Industrial Electronics, Vol. 56, No. 6, pp. 2121-2127, 2009. |
| 42. |
Y. S. Lai and Y. K. Lin, “Novel back-EMF detection technique of brushless DC motor drives for wide range control without using current and position sensors,” IEEE Trans. on Power Electronics, Vol. 23, No. 2, pp. 934-940, 2008. |
| 43. |
Y. S. Lai and Y. K. Lin, “Assessing pulse-width modulation techniques for brushless dc motor drives,” IEEE Industry Application Magazines, pp. 34-44, Sep./Oct., 2008. |
| 44. |
Y. S. Lai, P. S. Chen, S. K. Lee, and J. Chou, "Optimal common-mode voltage reduction PWM technique for inverter control with considering the dead-time effects-Part II: applications to IM drives with diode front end," IEEE Trans. on Industrial Applications, Vol. 40, No. 6, pp. 1613-1620, 2004. |
| 45. |
Y. S. Lai and F. S. Shyu, “Optimal PWM technique for inverter control with considering the dead-time effects-Part I: basic development ," IEEE Trans. on Industrial Applications, Vol. 40, No. 6, pp. 1605-1612, 2004. |
| 46. |
Y. S. Lai, W. K. Wang, and Y. C. Chen, "Novel switching techniques for reducing the speed ripple of AC drives with Direct Torque Control" IEEE Trans. on Industrial Electronics, Vol. 51, No. 4, pp. 768-775, 2004. |
| 47. |
Y. S. Lai, F. S. Shyu, and Y. H. Chang, "Novel loss reduction pulse-width modulation technique for brushless DC motor drives fed by MOSFET inverter," IEEE Trans. on Power Electronics, Vol. 19, No. 6, pp. 1646-1652, 2004. |
| 48. |
Y. S. Lai, F. S. Shyu, and S. S. Tseng “New initial position detection technique for three-phase brushless DC motor without position and current sensors,” IEEE Trans. on Industrial Applications, Vol. 39, No. 2, pp. 485-491, March/April 2003. |
| 49. |
Y. S. Lai and J. C. Lin, "New hybrid fuzzy controller for direct torque control induction motor drives," IEEE Trans. on Power Electronics, Vol. 18, No. 15, pp. 1211-1219, September 2003. |
| 50. |
Y. S. Lai, "Machine modeling and universal controller for vector-controlled induction motor drives," IEEE Trans. on Energy Conversion, Vol. 18, No. 1, pp. 23-32, March 2003. |
| 51. |
Y. S. Lai and F. S. Shyu, "Topology for hybrid multilevel inverter," IEE Proc. of Electric Power Applications, Vol. 149, No. 6, pp. 449-458, November 2002. |
| 52. |
F. S. Shyu and Y. S. Lai, "Virtual stage pulse-width modulation technique for multilevel inverter/converter," IEEE Trans. on Power Electronics, Vol. 17, No. 3, pp. 332-341, May 2002. |
| 53. |
Y. S. Lai, F. S. Shyu, and C. M. Li, "New real time harmonic elimination pulse-width modulation techniques for inverter control," Journal of the Chinese Inst. of Electrical Engineering, Vol. 9, No. 3, pp. 295-309, 2002. |
| 54. |
Y. S. Lai and J. H. Chen, "A new approach to direct torque control of induction motor drives for constant inverter switching frequency and torque ripple reduction," IEEE Trans. on Energy Conversion, Vol. 16, No. 3, pp. 220-227, September 2001. |
| 55. |
Y. S. Lai and Y. T. Chang, “Design and implementation of vector-controlled induction motor drives using random switching technique with constant sampling frequency,” IEEE Trans. on Power Electronics, Vol. 16, no. 3, May, pp. 400-409, 2001. |
| 56. |
Y. S. Lai, J. C. Lin, and J. Wang, "Direct torque control induction motor drives with self-commissioning based on Taguchi methodology," IEEE Trans. on Power Electronics, Vol. 15, No. 6, pp. 1065-1071, Nov. 2000. |
| 57. |
Y. C. Lou, C. H. Liu, and Y. S. Lai, "Adaptive stator resistance estimation and torque minimization for sensorless direct torque control motor drive at low speed," Journal of the Chinese Inst. of Electrical Engineering. Vol. 8, no. 3, pp. 215-228, 2001. |
| 58. |
S. S. Perng, Y. S. Lai, and C. H. Liu, “A novel sensorless controller based upon model reference adaptive system for an induction motor drive,” Journal of Chinese Institute of Electrical Engineering, Vol. 7, no. 4, pp. 249-261, 2000. |
| 59. |
T. P. Chen, C. H. Liu, and Y. S. Lai, "A new harmonic elimination technique for space vector modulation,” Journal of Chinese Institute of Electrical Engineering, Vol. 6, no. 4, pp. 337-345, 1999. |
| 60. |
Y. S. Lai, “Sensorless vector-controlled induction motor drives using new random technique for inverter control,” IEEE Trans. on Energy Conversion, Vol. 14, No. 4, pp. 1147-1155, Dec., 1999. |
| 61. |
Y. S. Lai, “New random technique of inverter control for common mode voltage reduction of inverter-fed induction motor drives,” IEEE Trans. on Energy Conversion, Vol. 14, No. 4, pp. 1139-1146, Dec., 1999. |
| 62. |
Y. S. Lai, “A new random inverter control technique for common mode voltage mitigation of motor drives,” IEE Proc. Electr. Power Appl., Vol. 146, No. 3, pp. 289-296, May, 1999. |
| 63. |
Y. S. Lai and S. C. Chang, “DSP-based implementation of sensorless vector drive using new random switching technique,” IEE Proc. Electr. Power Appl., Vol. 146, No. 2, pp. 163-172, March, 1999. |
| 64. |
Y. S. Lai, “A novel random switching technique for high performance inverter control,” Journal of Chinese Institute of Engineers, Vol. 20, No. 2, pp. 131-138, 1997. |
| 65. |
Y. S. Lai and S. R. Bowes, “A new sub-optimal pulse-width modulation technique for per-phase modulation and space vector modulation,” IEEE Trans. on Energy Conversion, Vol. 12, No. 4, pp. 310-316, 1997. |
| 66. |
Y. S. Lai, “Random switching techniques for inverter control,” IEE Electronics Letters, Vol. 33, No. 9, pp. 747-749, 1997. |
| 67. |
Y. S. Lai, “New random space vector modulation techniques for high switching frequency inverter control,” IEE Electronics Letters, Vol. 33, No. 17, pp. 1425-1426, 1997. |
| 68. |
S. R. Bowes and Y. S. Lai, "The relationship between space vector modulation and Regular-sampled pulse-width modulation, " IEEE Trans. on Industrial Electronics, Vol. 44, No. 5, pp. 670-679, 1997. |
| 69. |
S. R. Bowes and Y. S. Lai, “Investigations into optimising high switching frequency Regular-Sampled PWM for drives and static power converter,” IEE Proc. Electrical Power Appl., Vol. 143, No. 4, pp.281-292, 1996. |
| 70. |
Z, J, Su abd Y, S, Lai, “Circuit design of standby power detection for fully digital-controlled phase-shift full bridge converter,” Vol. 21, No. 5, pp. 162-169, May, 2011. |
| 71. |
P. L. Kao and Y. S. Lai, “Circuit design of AC feedback for inverter and converter,” J. of Electrical Monthly, Vol. 21, No. 4, pp. 180-183, April, 2011. |
| 72. |
G. J. Su, C. C. SHyu and Y. S. Lai, “Photo-coupled feedback circuit design for digital-controlled inverter,” J. of Electrical Monthly, Vol. 21, No. 3, pp. 166-171, March, 2011. |
| 73. |
G. J. Su, C. C. SHyu and Y. S. Lai, “Photo-coupled feedback circuit design for isolated DC/DC converter,” J. of Electrical Monthly, Vol. 21, No. 2, pp. 172-175, Feb., 2011. |
| 74. |
C. H. Lo and Y. S. lai, “Feedback circuit design for digital-controlled AC/DC converter and DC/AC inverter,” J. of Electrical Monthly, Vol. 21, No. 1, pp. 152-157, Jan., 2011. |
| 75. |
C. H. Liang, Y. K. Lin and Y. S. Lai, “MCU-based implementation of PMSM drives,” J. of Electrical Monthly, Vol. 21, No. 1, pp. 86-94, Jan., 2011. |
| 76. |
C. C. Kuo and Y. S. Lai, “Design and implementation of fully digital-controlled boost converter and inverter for UPS applications,” J. of Power Electronics, Vol. 9, No. 1, pp. 29-37, Jan. 2011. (in Chinese) |
| 77. |
D. S. Hsieh, Y. K. Lin and Y. S. Lai, “Design and implementation of BLDCM drives without shaft sensor,” J. of Power Electronics , Vol. 8, No. 6, pp. 21-27, Nov. 2010. (in Chinese) |
| 78. |
K. M. Ho, C. A. Yeh and Y. S. Lai, “Design and implementation of digital-controlled power factor corrector,” J. of Power Electronics , Vol. 8, No. 5, pp. 59-67, Sep. 2010. (in Chinese) |
| 79. |
Z. J. Su, C. A. Yeh, Y. S. Lai, “Detection methods for phase-shift full-bridge converter to reduce the standby power consumption,” J. of Power Electronics , Vol. 8, No. 3, pp. 35-41, May 2010. (in Chinese) |
| 80. |
J. Z. Xu, Y. S. Lai, “Design and implementation of fully digital-controlled inverter using MCU,” J. of Power Electronics , Vol. 8, No. 2, pp. 25-31, March 2010. (in Chinese) |
| 81. |
Y. K. Lin, Y. S. Lai, “Dead-time elimination technique for three-phase inverter control by PWM,” J. of Electrical Monthly, Vol. 20. , No. 1, pp. 88-98, Jan. 2010. (in Chinese) |
| 82. |
Y. Y. Lee, K. Y. Lin and Y, S, Lai, “Design and implementation of vector-controlled drives using micro-controller,” J. of Power Electronics, Vol. 7, No. 6, pp. 27-36, Nov. 2009. (in Chinese) |
| 83. |
K. Y. Lee, P. T. Huang and Y. S. Lai, “Design and implementation of AC/DC converter meeting standby power consumption code,” J. of Electrical Monthly, Vol. 19, No. 9, pp. 162-174, Jan. 2009. |
| 84. |
Y. L. Wu, Y. T. Y. S. Lai, Y. F. Feng, G. Y. Sun and S. Y. Hsiao, Design and implementation of digital-controlled DC converter with high current and low power for vehicle applications,” J. of Power Electronics, Vol. 7, No. 4, pp. 14-22, July 2009. (in Chinese) |
| 85. |
Y. S. Lai and H. L. Lee, “Design and implementation of slide mode controller for buck converter,” J. of Power Electronics, Vol. 7, No. 4, pp. 23-40, July 2009. (in Chinese) |
| 86. |
Z. H. Yang and Y. S. Lai, “Design of PWM control IC for three level inverter,” J. of Power Electronics, Vol. 7, No. 3, pp. 3-14, May 2009. (in Chinese) |
| 87. |
40. S. Y. Su, K. Y. Lee and Y. S. Lai, “Design and implementation of phase-shift controlled DC/DC converter with zero-voltage switching,” J. of Power Electronics, Vol. 7, No. 2, pp. 50-60, March 2009. (in Chinese) |
| 88. |
G. C. Wu and Y. S. Lai, “Design and implementation of digital controller for interleaved double forward converters,” J. of Power Electronics, Vol. 7, No. 2, pp. 61-75, March 2009. (in Chinese) |
| 89. |
C, H, Lin and Y. S. Lai, “Design and implementation of PMSM drives for transmission application,” J. of Power Electronics, Vol. 7, No. 1, pp. 32-40, Jan. 2009. (in Chinese) |
| 90. |
43. T. C. Chuan, W. S. Chen, Y. S. Lai, R. K. Lin and C. R. Lin, “Design and implementation of current fed full-bridge converter with active clamping circuit,” J. of Power Electronics, Vol. 7, No. 1, pp. 51-62, Jan. 2009. (in Chinese) |
| 91. |
Y. S. Lai and Y. K. Lin, “Discussion about the PWM controlled fan drives and DC-link capacitor of inverter,” J. of Electrical Monthly, Vol. 18, No. 6, pp. 174-179, June 2008. (in Chinese) |
| 92. |
Y. S. Lai, T. C. Chuan, Y. C. Chen, K. Y. Lee and Z. L. Hsiao, “Study on the efficiency improvement of BLDCM drives using PWM and PAM technique for refrigerator application,” J. of Electrical Monthly, Vol. 18, No. 1, pp. 129-136, Jan. 2008. (in Chinese) |
| 93. |
Y. K. Lin, P. C. Lin, Y. S. Lai, L. T. Chang, C. P. Chen and T. S. Wang, “Design of control IC for high efficient resonant DC converter,” J. of Power Electronics, Vol. 5, No. 5, pp. 23-34, Sep. 2007. (in Chinese) |
| 94. |
Y. S. Lai and C. H. Huang, “Universal back EMF detection technique for BLDCM drives,” J. of Mechanical Monthly, Vol. 33, No. 4, pp. 52-63, Jan. 2008. (in Chinese) |
| 95. |
Y. S. Lai and Y. K. Chou, “PWM technique for voltage balance of DC-link capacitors of three-level inverter,” J. of Electrical Monthly, Vol. 17, No. 1, pp. 118-131, Jan. 2007. (in Chinese) |
| 96. |
Y. S. Lai and Y. K. Lin, “Analysis of PWM technique for inverter-controlled BLDCM drives,” J. of Electrical Monthly, Vol. 17, No. 1, pp. 168-177, Jan. 2007. (in Chinese) |
| 97. |
Y. L. Wu, K. Y. Lee and Y. S. Lai, “Design and implementation of the bi-directional front-end stage for inverter,” J. of Electrical Monthly, Vol. 16, No. 1, pp. 108-114, 2006. (in Chinese) |
| 98. |
C. H. Tseng, K. Y. Lee and Y. S. Lai, “Design and implementation of the power converter for pulse-amplitude modulation controlled brushless DC motor drives,” J. of Electrical Monthly, Vol. 16, No. 1, pp. 116-125, 2006. (in Chinese) |
| 99. |
Y. S. Lai and F. S. Shyu, “Features of MOSFET and its driver circuits,” J. of Electrical Monthly, Vol. 15, No. 12, pp. 128-139, Dec., 2005. (in Chinese) |
| 100. |
Y. S. Lai, J. H. Lin and K. Y. Lee, “Design and analysis of AC/DC converter to meet the stand-by power consumption requirement,” J. of Electrical Monthly, Vol. 15, No. 8, pp. 282-286, Dec., 2005. (in Chinese) |
| 101. |
Y. S. Lai and F. S. Shyu, “Initial position detection technique for brushless DC motor drives,” J. of Electrical Monthly, Vol. 170, pp. 212-221, Dec., 2004. (in Chinese) |
| 102. |
Y. S. Lai, “Control technique for brushless DC motor drives,” J. of Electrical Monthly, Vol. 169, pp. 234-241, Nov., 2004. (in Chinese) |
| 103. |
Y. S. Lai, “Multilevel techniques for inverter applications,” J. of Electrical Monthly, Vol. 167, pp. 244-253, Oct., 2004. (in Chinese) |
| 104. |
Y. S. Lai and C. F. Hu, “Introduction to the simulation software for the development of inverter control techniques,” J. of Electrical Monthly, Vol. 164, pp. 246-257, Aug., 2004. (in Chinese) |
| 105. |
Y. S. Lai, M. C. Chang and C. T. Chiu, “Long cable issue for inverter,” J. of Electrical Monthly, Vol. 163, pp. 216-223, July, 2004. (in Chinese) |
| 106. |
Y. S. Lai, P. S. Chen and C. T. Chiu, “Common-mode voltage issue for inverter,” J. of Electrical Monthly, Vol. 162, pp. 264-273, Jun., 2004. (in Chinese) |
| 107. |
Y. S. Lai, Y. T. Chang, and C. T. Chiu, “Harmonics and power quality for inverter,” J. of Electrical Monthly, Vol. 161, pp. 214-223, May, 2004. (in Chinese) |
| 108. |
Y. S. Lai and Y. C. Chen, “Direct torque control of inverter-controlled induction motors,” J. of Electrical Monthly, Vol. 160, pp. 246-253, Apr., 2004. (in Chinese) |
| 109. |
Y. S. Lai, “Vector control of inverter-controlled induction motors,” J. of Electrical Monthly, Vol. 159, pp. 212-221, Mar., 2004. (in Chinese) |
| 110. |
Y. S. Lai and J. C. Hu, “Mathematic model of induction motors,” J. of Electrical Monthly, Vol. 158, pp. 220-229, Feb., 2004. (in Chinese) |
| 111. |
Y. S. Lai, “Fundamental of coordination transformation for vector control,” J. of Electrical Monthly, Vol. 157, pp. 216-223, Jan., 2004. (in Chinese) |
| 112. |
P. S. Chen, Y. S. Lai and M. P. Chen, “Investigation into the features of pulse-width modulation technique for common-mode voltage reduction,” J. of Electrical Monthly, Vol. 157, pp. 168-179, Jan., 2004. (in Chinese) |
| 113. |
Y. S. Lai and W. H. Rao, “Development of control IC using space vector modulation techniques for inverter,” J. of Electrical Monthly, Vol. 157, pp. 120-133, Jan., 2004. (in Chinese) |
| 114. |
Y. S. Lai and W. H. Rao, “Space vector modulation techniques for inverter,” J. of Electrical Monthly, Vol. 157, pp. 108-119, Jan., 2004. (in Chinese) |
| 115. |
Y. S. Lai and S. C. Tien, “A novel torque compensate ion technique for permanent magnet synchronous motor drives,” J. of Electrical Monthly, Vol. 145, pp. 128-140, Jan., 2003. (in Chinese) |
| 116. |
Y. S. Lai, J. S. Wang, Z. Q. Lin, M. H. Wang, and S. C. Tien, "Internet-based monitoring and control of fuzzy-controlled inverter system," J. of Machinery Monthly, Vol. 327, pp. 46-55, Oct. 2002. (in Chinese) |
| 117. |
Y. S. Lai and F. S. Shyu, "Comparative study on sinusoidal PWM techniques for medium voltage inverter," J. of Electrical Monthly, Vol. 133, pp. 165-175, Jan., 2002. (in Chinese) |
| 118. |
S. G. Chen and Y. S. Lai “The start-up techniques for brushless PM motor,” J. of Machinery Monthly, Vol. 27, No. 11, pp. 310-318, Nov. 2001. (in Chinese) |
| 119. |
Y. S. Lai and W. K. Wang, “High frequency switching technique for space vector modulation of inverter,” J. of Machinery Monthly, Vol. 27, No. 11, pp. 252-263, Nov. 2001. (in Chinese) |
| 120. |
Y. C. Chen and Y. S. Lai, "Torque ripple control of permanent magnet brushless motor," Power Electronics Technology, No. 63, pp. 49-57, June 2001. (in Chinese) |
| 121. |
Y. S. Lai and Y. T. Chang, "Implementation of vector-controlled induction motor drives using random switching technique," J. of Electrical Monthly, Vol. 121, pp. 147-158, Jan., 2001. (in Chinese) |
| 122. |
M. C. Chang and Y. S. Lai, “High efficiency control for inverter-controlled screwed chiller,” J. of Electrical Monthly, Vol. 121, pp. 159-165, Jan., 2001. (in Chinese) |
| 123. |
M. C. Chang, J. Wang, and Y. S. Lai, “Variable-water-volume control of cooling water for energy saving,” J. of Machinery Monthly, Vol. 26, No. 7, pp. 416- 421, July 2000. (in Chinese) |
| 124. |
Y. S. Lai, J. C. Lin, and J. Wang, "Self-commissioning of induction motor drives based on Direct Torque Control," Power Electronics Technology, No. 57, pp. 36-44, June 2000. (in Chinese) |
| 125. |
Y. S. Lai, et al., "Implementation and design of a multilevel inverter with harmonic elimination," Technical Journal of Digital Signal Processing, Vol. 1, pp. 121-127, March, 2000. (in Chinese) |
| 126. |
Y. T. Chang, J. S. Wang, Y. S. Lai, M. G. Chang, and M. H. Su, " Investigation into the possibility of the applications of high power inverter to air-conditioner for energy saving," J. of Electrical Monthly, Vol. 109, pp. 180-186, 2000. |
| 127. |
M. G. Chang and Y. S. Lai “Improvement methods for the long-cable issue of inverter-controlled induction motor drive,” J. of Electrical Monthly, Vol. 109, pp. 147-154, Jan. 2000. |
| 128. |
Y. S. Lai, T. W. Hong, and J. H. Chen, “A universal vector controller for induction motor drives,” Power Electronics Technology, No. 51, pp. 53-60,1999. (in Chinese) |
| 129. |
Y.S. Lai and Y. T. Chang, “High power inverter,” J. of Electrical Monthly, Vol. 97, pp. 120-126, Jan. 1999. |
| 130. |
Y. S. Lai and S. C. Chang, “Sensorless induction motor drives using random switching technique for inverter control,” Power Electronics Technology, No. 45, pp. 49-57, 1998. (in Chinese) |
| 131. |
Y. S. Lai, T. Y. Shihn, Y. S. Kuan, and H. C. Huang, “ A novel inverter control technique for direct torque control drives,” Power Electronics Technology, No. 39, pp. 71-77, 1997. (in Chinese) |
| 132. |
Y. S. Lai, “The development of software for control simulation subjected to the ITRI-A robot,” Journal of Technology, Vol. 11, No. 2, pp. 273-282, 1996. (in Chinese) |
| 研討會論文 |
| 1. |
K. W. Wang, Z. H. Qiu, C. J. Hsu and Y. S. Lai, "Optimum On-Line DC-Link Voltage Regulation for Efficiency Improvement of Motor Drives," IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, 2022. |
| 2. |
Y. Y. Huang and Y. S. Lai, “Novel Efficiency Optimized Inductor Design for GaN-Based Totem-Pole PFC,” IEEE ISIE, 2022. |
| 3. |
C. Y. Li and Y. S. Lai, “Novel Hybrid Switching Control Technique for Light Load Efficiency Improvement of GaN-based Totem Pole Power Factor Corrector”, IEEE ISIE, 2022. |
| 4. |
Y. C. Zhuo, C. J. Hsu, Z. H. Qiu, Y. S. Lai, “Bandwidth Boost Method of Current Control for Servo Motor Drives with Current Observer,” Nov. 16-19, IEEE IFEEC 2021.
|
| 5. |
W. S. Chen and Y. S. Lai, “New Module-Based Laboratory Course Design for Power Electronics,” Nov. 16-19, IEEE IFEEC 2021.
|
| 6. |
W. K. Teh and Y. S. Lai, “Comparison of PWM Techniques for 3‐Phase Inverters Connected in Parallel,” Nov. 25-28, IEEE IFEEC 2019. |
| 7. |
Y. S. Lai and M. H. Yu, “Maximum Efficiency Point Tracking for Two‐Stage Server Power Supply ,” Nov. 25-28, IEEE IFEEC 2019. |
| 8. |
C. J. Hsu and Y. S. Lai, “On-line Parameter Identification and Self-Commissioning of Current Controller for Servo Motor Drives Considering Time Delay in Both Modeling and Control,” Oct. 21-23, pp. 2397-2403, IEEE IECON 2018. |
| 9. |
Y. S. Lai and M. H. Yu, “A New Hybrid Switching Frequency Control for Resonant Converter with Fast Dynamic Response,” pp. 1536-1543, Sep. 23-27, IEEE Energy Conversion Congress and Exposition (ECCE), 2018. |
| 10. |
Y. S. Lai and Y. H. Hsu, “Dual Servo Motor Drives Control Using Single MCU,” Sep. 23-27, pp. 1-6, IEEE Industry Applications Society Annual Meeting (IAS), 2018. |
| 11. |
Y. S. Lai and J. Y. Wang, “Novel Switching Control Technique for Bridgeless PFC to Reduce Both Switching and Conduction Losses,” IEEE IECON 2017. |
| 12. |
Y. S. Lai and M. H. Yu, :On-line Auto-tuning Technique of Switching Frequency for Resonant Converter Considering Resonant Components Tolerance and Variation," Asian Conference on Energy, Power and Transportation Electrification, 2017. |
| 13. |
Y. S. Lai and M. H. Ho, “Self-Commissioning Technique for High Bandwidth Servo Motor Drives,” IEEE ECCE 2017. |
| 14. |
M. H. Ho and Y. S. Lai, “Controller Design of Servo Drives for Bandwidth Improvement,” IEEE IFEEC-ECCE Asia, 2017. |
| 15. |
Y. S. Lai and M. S. Yu, "Efficiency Improvement Method for Two-Stage Server Power by Auto-Tuning of Bus Voltage based upon New On-Line Switching Frequency Tracking Technique," IEEE IECON, 2016. |
| 16. |
J. F. Chen, Y. S. Lai and W. S. Chen, "Hybrid Predictive Current-Mode Control for Power Factor Corrector with On-line Parameter Tuning," IEEE IECON, 2016. |
| 17. |
C. J. Hsu and Y. S. Lai, “On-Line Optimal Bandwidth Search and Auto Tuning Techniques for Servo Motor Drives,” IEEE ECCE, 2016. |
| 18. |
Y. S. Lai, Y. K. Lin, F. P. Chuang, and J. T. Yu “Novel Modeless Predictive Current Control for Three-Phase AC/DC Converter,” IEEE ICIT 2016. |
| 19. |
Y. S. Lai and S. W. Chen, “New Switching Control Technique to Improve the Efficiency under Light Load Condition for LLC Converter with Large Magnetizing Inductance,” IEEE INTELEC, 2015. |
| 20. |
C. K. Lin, D. Y. Wu, J. W. Hu, H. C. Yu, and Y. S. Lai . “Model-Free Predictive Current Control of a Voltage Source Inverter,” IEEE IFEEC, 2015 |
| 21. |
P. Y. Lin, W. T. Lee, S. W. Chen, J. C. Hwang, and Y. S. Lai, “Infinite speed drives control with MTPA and MTPV for interior permanent magnet synchronous motor,” IEEE IECON, Nov., 2014. |
| 22. |
H. L. Chiang and Y. S. Lai, “New open loop control technique of boost converter to mitigate temperature impact for LED applications,” IEEE IECON, Nov., 2014. |
| 23. |
Y. S. Lai, W. S. Chen, F. C. Lee, T. W. Shei, S. H. Chang, and C. C. Lin, “Multi-source converter for energy harvest in an internal combustion engine vehicle and its power distribution control,” IEEE ISIE, June, 2014. |
| 24. |
W. S. Chen and Y. S. Lai, “Design of laboratory course for learning power converters at Taipei Tech,” IEEE ISIE, June, 2014. |
| 25. |
Y. S. Lai and K. M. Ho, “FPGA-based digital-controlled power converter designed with universal input meeting 80 plus platinum efficiency code and standby power code for sever power applications,” IEEE ECCE Asia, May, 2014 |
| 26. |
Y. S. Lai and J. S. Su, “On-line DC-link voltage control of LLC resonant converter for server power applications,” IEEE ECCE, Sep., 2014. |
| 27. |
Y. S. Lai, S. W. Chen and Z. J. Su, “Self-commissioning of digital-controlled power factor corrector with critical current mode,” IEEE IFEEC, pp. 24-29, 2013. |
| 28. |
Y. S. Lai, Z. J. Su and W. S. Chen, “New hybrid control technique to improve light load efficiency while meeting the hold-up time requirement for two-stage server power” Proc. IEEE ECCE, pp. 4180 – 4187, 2013 |
| 29. |
Y. S. Lai and Y. K. Lin, "Design and Implementation of Digital-Controlled Bi-directional Converter for Scooter Applications," Proc. of the 10th IEEE PEDS, pp.271-276, 2013. |
| 30. |
C. A. Lai and Y. S. Lai, "New AC/DC Converter Considering Both Inrush Current Limitation and Start-up Time," Proc. of the 10th IEEE PEDS, pp.1231-1235, 2013. |
| 31. |
Y. S. Lai and K. M. Ho, "Novel On-line Parameter Tuning Method for Digital-Controlled Boost PFC with Transition Current Mode," Proc of the 10th IEEE PEDS, pp.232-237, 2013. |
| 32. |
Y. S. Lai, S. W. Chen, W. T. Lee, Y. K. Lin and J. F. Tsai, "Novel Integrated Inverter/Converter Circuit and Control Technique of Motor Drives with Dual Mode Control for EV/HEV Applications," Proc. of the IEEE ISIE, pp.1-6, 2013. |
| 33. |
Y. S. Lai, Z. J. Su and Y. T. Chang, "New Thermal Balance Control Techniques of Phase-Shift Full-Bridge Converter," Proc. of the IEEE ECCE, pp.3975-3980, 2012. |
| 34. |
Y. S. Lai and B. Y. Chen, "Two-dimensional Random PWM Technique for Full-bridge DC/DC Converter," Proc. of the IEEE IECON, pp.846-851, 2012. |
| 35. |
Y. S. Lai and Z. J. Su, "Novel On-Line Maximum Duty Point Tracking Technique to Improving Server Power Efficiency Meeting 80Plus Gold Code," Proc of the IEEE IECON, pp.609-614, 2012. |
| 36. |
Y. S. Lai and S. J. Lu, "Multi-Inverters Control Technique with Current Sharing Control for Back-up Power System Applications," Proc of the IEEE ICRERA, pp.1-7, 2012. |
| 37. |
Y. S. Lai and K. M. Ho, "Bandwidth-based Analysis and Controller Design of Power Factor Corrector for Universal Applications," Proc of the IEEE ICIT, pp.626-631, 2012. |
| 38. |
Y. S. Lai and K. M. Ho, "Novel Random Switching PWM with Constant Sampling Frequency and Constant Inductor Average Current for Digital-Controlled Power Factor Corrector," Proc of the IEEE ECCE, pp.4577-4583, 2012. |
| 39. |
Y. S. Lai, Y. K. Lin and C. W. Chen, "New Hybrid Pulse-Width Modulation Technique to Reduce Current Distortion and Extend Current Reconstruction Range for Three-Phase Inverter using only DC-Link Sensor," Proc of the 6th PEMD, IET, pp. 1-6, 2012. |
| 40. |
Y. S. Lai and K. M. Ho, "FPGA-based Digital-controlled Power Converter with Universal Input Meeting 80 Plus Platinum Efficiency Code and Standby Power Code for Sever Power Applications," Proc of the IEEE ICRERA, pp. 1-6, 2012. |
| 41. |
Y. T. Chang, B. Y. Chen and Y. S. Lai, “Novel random switching PWM technique with constant sampling frequency and constant inductor average current for digital-controlled converter," Proc. of the 3rd IEEE ECCE, 2011. |
| 42. |
Y. K. Lin and Y. S. Lai, “PWM technique to extend current reconstruction range and reduce common-mode voltage for three-phase inverter using DC-link current sensor only," Proc. of the 3rd IEEE ECCE, 2011. |
| 43. |
Y. S. Lai, Z. J. Su, C. A. Yeh, F. Takahashi and M. Hamaogi, "Current sensing methods for standby power control of digital-controlled DC/DC converter," Proc. of the 8th IEEE ICPE, pp. 1742-1748, 2011. |
| 44. |
Y. S. Lai, Y. T. Chang and C. T. Kuo, “Robust control of digital-controlled buck converter based upon two- degree-of-freedom controller,” presented in IEEE IECON, 2010. |
| 45. |
Y. T. Chang and Y. S. Lai, “Practical considerations for the design and implementation of digital-controlled power converters,” presented in IEEE IECON, 2010. |
| 46. |
P. Y. Lin and Y. S. Lai, “Voltage control of interior permanent magnet synchronous motor drives to extend DC-link voltage utilization for flux weakening operation,” presented in IEEE IECON, 2010. |
| 47. |
B. Y. Chen, C. C. Hsu and Y. S. Lai, “Novel Current Limitation Technique without Current Feedback for Digital-Controlled Battery Charger in UPS Applications,” accepted by IEEE ECCE, 2010. |
| 48. |
C. A. Yeh, K. M. Ho and Y. S. Lai, “An Unified Approach to Predictive Transition Current Mode Control for Digital-Controlled Power Factor Corrector,” accept by IEEE ECCE, 2010. |
| 49. |
Y. K. Lin and Y. S. Lai, “Pulse-width modulation technique for BLDCM drives to reduce commutation torque ripple without calculation of commutation time,” accepted by IEEE ECCE, 2010. |
| 50. |
C. A. Yeh, K. M. Ho and Y. S. Lai, “Digitally-Controlled Power Factor Corrector with Interleave Transition Current Mode Control,” Proc. Of the IET PEMD, 2010. |
| 51. |
C. A. Yeh, K. M. Ho, Y. S. Lai, F. Takahashi and M. Hamaogi, “Digital-controlled power factor corrector with transition current mode control without zero current detection ,” Proc. of IEEE PEDS, pp. 198-203, Nov. 2009. |
| 52. |
C. A. Yeh and Y. S. Lai, “Novel hybrid control technique with constant on/off time control for DC/DC converter to reduce the switching losses,” Proc. of IEEE PEDS, pp. 848-853, Nov. 2009. |
| 53. |
B. Y. Chen and Y. S. Lai, “Novel dual mode operation of phase-shifted full bridge converter to improve efficiency under light load condition,” Proc. of IEEE ECCE, pp. 1367-1374, 2009. |
| 54. |
Y. T. Chang and Y. S. Lai, “On-line parameter tuning technique for predictive current mode control operating in boundary conduction mode,” Proc. of IEEE ECCE, pp. 715-712, 2009. |
| 55. |
Y. K. Lin and Y. S. Lai, “Dead-time elimination method and current polarity detection circuit without separate power sources for three-phase inverter,” Proc. of IEEE ECCE, pp. 83-90, 2009. |
| 56. |
P. Y. Lin and Y. S. Lai, “Novel voltage trajectory control for field weakening operation of induction motor drives,” Proc. of IEEE ECCE, pp. 1540-1546, 2009. |
| 57. |
Y. S. Lai and Y. K. Lin, “Dead-time elimination of PWM-controlled inverter/converter without separate power sources for current polarity detection circuit,” presented in IEEE ISET, Nov., 2008. |
| 58. |
P. Y. Lin and Y. S. Lai, “Novel voltage trajectory control for flux weakening operation of surface mounted PMSM drives,” presented in IEEE IAS, 2008. |
| 59. |
Y. T. Chang and Y. S. Lai, “Digital compensator design to reduce phase lag for multi-sampling controlled DC-DC converters,” presented in IEEE IAS, 2008. |
| 60. |
Y. T. Chang and Y. S. Lai, “Digital controller design for buck converter with the reduction of phase transition and output voltage oscillation under transient state,” IET PEMD, April, York, 2008. |
| 61. |
C. M. Lee and Y. S. Lai, “Averaged switch modeling of DC/DC converters using new switch network,” Proc. of IEEE PEDS, Nov., Bangkok, 2007. |
| 62. |
K. Y. Lee, H. Y. Hsu and Y. S. Lai, “Simple digital-controlled AC/DC converter with power factor correction for universal input applications,” in Proc. of the IEEE IECON Conference, pp. 1749-1754, 2007. |
| 63. |
Y. S. Lai, Y. K Chou and S. Y. Pai, “Simple PWM technique of capacitor voltage balance for three-level inverter with DC-link voltage sensor only,” in Proc. of the IEEE IECON Conference, pp. 1472-1477, 2007. |
| 64. |
Y. T. Chang and Y. S. Lai, “Effect of sampling frequency of A/D converter on controller stability and bandwidth of digital-controlled power converter,” in Proc. Of the International Conference on Power Electronics, pp. 625-629, Oct., 2007. |
| 65. |
Y. T. Chang, C. A. Yeh, M. Hamaogi, F. Takahashi and Y. S. Lai, “Current ripple reduction technique of Dc/DC converter,” in Proc. of the International Conference on Power Electronics, pp. 1087-1091, Oct., 2007. |
| 66. |
H. Chang and Y. S. Lai, “Novel AC Driver and Protection Circuits with Dimming Control for Light Emitting Diodes,” Conference Record of the IEEE IAS Annual Meeting, pp. 696-700, Sept., 2007. |
| 67. |
Y. S. Lai, C. A. Yeh, Y. T. Chang and K.Y. Lee, “New Self-Commissioning Digital Power Converter with Peak Current Mode Control and Leading Edge Modulation Using Low Sampling Frequency A/D Converter,” Conference Record of the IEEE IAS Annual Meeting, pp. 2351-2356, Sept., 2007. |
| 68. |
Y. S. Lai, K. Y. Lee, J. H. Tseng, Y. C. Chen and T. L. Hsiao, “Efficiency Comparison of PWM-Controlled and PAM-Controlled Sensorless BLDCM Drives for Refrigerator Applications,” Conference Record of the IEEE IAS Annual Meeting, pp. 268-273, Sept., 2007. |
| 69. |
Y. S. Lai and P. S. Chen, “New EMI Filter Design Method for Single Phase Power Converter Using Software-Based Noise Separation Method,” Conference Record of the IEEE IAS Annual Meeting, pp. 2282-2288, Sept., 2007. |
| 70. |
K. Y. Lee, B. T. Hunag and Y. S. Lai, “Design of a two-stage AC/DC converter with standby power losses less than 1 W,” in Proc. of Power Conversion Conference, 2007. |
| 71. |
Y. S. Lai, C. A, Yeh and K. Y. Lee, “Novel self-commissioning digital power converter control using low sampling frequency A/D converter,” in Proc. of Power Conversion Conference, 2007. |
| 72. |
Y. S. Lai and Y. K. Lin, “A unified approach to back-EMF detection for brushless DC motor drives without current and Hall sensors,” in Proc. of the IEEE IECON Conference, 2006. |
| 73. |
Y. S. Lai and Y. K. Lin, “Back-EMF detection technique of brushless DC motor drives for wide range control,” in Proc. of the IEEE IECON Conference, 2006. |
| 74. |
K. Y. Lee, C. A. Yeh, and Y. S. Lai, “Design and implementation of fully digital controller for non-isolated-point-of-load converter with high current slew rate,” in Proc. of the IEEE IECON Conference, 2006. |
| 75. |
P. S. Chen and Y. S. Lai, “Software-based separation of conductive EMI signals,” Conference Record of the IEEE IAS Annual Meeting, pp. 1209 -1213, October, 2006. |
| 76. |
Y. S. Lai and Y. K. Lin, “Assessment of pulse-width modulation techniques for brushless DC motor drives,” Conference Record of the IEEE IAS Annual Meeting, pp. 1629 -1636, October, 2006. |
| 77. |
K. Y. Lee and Y. S. Lai, “Analysis and design of adapter met energy efficiency code under standby condition without using current sensor and hysteresis circuit for notebook computer applications,” Proc. of the IEEE Power Electronics Specialists Conference, June 2006. |
| 78. |
K. Y. Lee, Y. L. Wu and Y. S. Lai, “Novel bidirectional three-phase rectifier without using DC-link current sensor,” in Proc. of the IEEE Power Electronics Specialists Conference, June 2006. |
| 79. |
Y. S. Lai, F. S. Shyu and Y. K. Lin “Novel PWM technique without causing reversal DC-link current for brushless DC motor drives with bootstrap driver,” Conference Record of the IEEE IAS Annual Meeting, pp. 2182 -2188, October, 2005. |
| 80. |
Y.S. Lai, F.S. Shyu, and W.H. Rao, "Novel Back-EMF detection technique of brushless DC motor drives for whole duty-ratio range control, Proc. of the IEEE IECON Conference, 2004. |
| 81. |
Y.S. Lai, S.C. Tien, F.S. Shyu, and J.C. Hu, "Novel permanent magnet synchronous motor drive fed by voltage-controlled voltage source inverter," Proc. of the IEEE IECON Conference, 2004. |
| 82. |
Y.S. Lai, F.S. Shyu, C. W. Lin, and W.S. Chang, " Novel torque boost technique for brushless DC Motor drives without current sensor," Proc. of the IEEE IECON Conference, 2004. |
| 83. |
K.Y. Lee, and Y.S. Lai, "A novel magnetic-less bi-directional DC-DC converter," Proc. of the IEEE IECON Conference, 2004. |
| 84. |
Y.S. Lai, and R. Bowes " Optimal bus-clamped PWM techniques for three-phase motor drives," Proc. of the IEEE IECON Conference, 2004. |
| 85. |
Y.S. Lai, and W.H. Rao, " Design of an integrated circuit of PWM controller for three-phase inverter," Proc. of the IEEE IECON Conference, 2004. |
| 86. |
Y. S. Lai and F. S. Shyu, “Novel initial position detection technique for three-phase brushless DC motor without position and current sensors,” Conf. Record of IEEE IAS, pp. 2377-2381, 2004 |
| 87. |
Y. C. Hung, F. S. Shyu, C. J. Lin, and Y. S. Lai, “New voltage balance technique for capacitors of symmetrical half-bridge converter with current mode control,” Proc. of the IEEE PEDS Conference, 2003. |
| 88. |
Y. C. Hung, F. S. Shyu, C. J. Lin, and Y. S. Lai, “Design and implementation of symmetrical half-bridge DC-DC converter,” Proc. of the IEEE PEDS Conference, 2003. |
| 89. |
Y. S. Lai, S. C. Tien, F. S. Shyu and J. C. Hu, "Novel permanent magnet synchronous motor drive fed by voltage-controlled voltage source inverter," Proc. of IEEE IECON, pp. 2138-2143, 2003. |
| 90. |
Y. S. Lai, F. S. Shyu, and Y. S. Chang, “Novel sensorless PWM-controlled BLDCM drives without using position and current sensors, filter and center-tap voltage,” Proc. Of IEEE IECON, pp. 2144-2149, 2003. |
| 91. |
Y. S. Lai, P. S. Chen, S. K. Lee, and J. Chou, “Common-mode voltage reduction PWM technique for wide speed range control of induction motor drives fed by inverter with diode front end," Conf. Record of IEEE IAS, pp. 424-431, 2003. |
| 92. |
Y. S. Lai and F. S. Shyu, “Optimal common-mode voltage reduction PWM technique for induction motor drives with considering the dead-time effects for inverter control,” Conference Record of IEEE IAS, pp. 152-159, 2003. |
| 93. |
Y. S. Lai, J. S. Wang, Z. Q. Lin, M. H. Wang, and S. C. Tien, "Internet-based monitoring and control of fuzzy-controlled inverter system," Proc. of the IEEE IECON, pp. 2365-2370, Nov. 2002. |
| 94. |
Y. S. Lai, F. S. Shyu and S. S. Tseng, “New initial position detection technique for three-phase brushless DC motor without position and current sensors,” Conference Record of the IEEE IAS Annual Meeting, pp. 1653 -1660, October, 2002. |
| 95. |
Y. S. Lai, F. S. Shyu, and Y. H. Chang, “Novel pulse-width modulation technique with loss reduction for small power brushless DC motor drives,” Conference Record of the IEEE IAS Annual Meeting, pp. 2057 -2064, October, 2002. |
| 96. |
Y. S. Lai and F. S. Shyu, "New topology for hybrid multilevel inverter," Proceeding of the IEE PEMD Conference, pp. 211-216, Bath, UK, April 16-18, 2002. |
| 97. |
Y. S. Lai and F. S. Shyu, “Investigation into the performance of multilevel PWM methods at low modulation indices,” Conference Record of the IEEE IAS Annual Meeting, pp. 603-610, September 2001. |
| 98. |
Y. S. Lai and J. C. Lin, "Fuzzy logic control for Direct Torque Control induction motor drives with inverter controlled using space vector modulation technique," presented in the 9th European Power Electronics Conference, August 2001. |
| 99. |
Y. S. Lai and J. C. Lin, "Investigation into the performance of various control Methods for Direct Torque Control induction motor drives," presented in the 9th European Power Electronics Conference, August 2001. |
| 100. |
Y. S. Lai, Y. T. Chang, and J. Wang, “Design and implementation of induction motor drives using random switching technique,” Proc. of the IEEE PES Summer Meeting, pp. 2487-2492, 2000. |
| 101. |
Y. S. Lai, J. C. Lin, and J. Wang, “Self-Commission of Induction Motor Drives based on Direct Torque Control,” Proc. of the IEEE PES Summer Meeting, pp. 2481-2486, 2000. |
| 102. |
M. C. Chang, J. Wang, and Y. S. Lai, “Water flow control for air-conditioner using inverter-controlled induction motor drives,” Proc. of the IEEE PES Summer Meeting, pp. 2459-2462, 2000. |
| 103. |
Y. S. Lai, J. H. Chen, and C. H. Liu, “A universal vector controller for induction motor drives fed by voltage-controlled voltage source inverter,” Proc. of the IEEE PES Summer Meeting, pp. 2493-2498, 2000. |
| 104. |
Y. C. Luo, C. H. Liu, and Y. S. Lai, “Adaptive stator resistance estimation and low speed torque ripple minimization for a sensorless direct torque control induction motor drive," Proceedings of the IPEC, pp. 1087- 1092, 2000. |
| 105. |
Y. S. Lai, C. M. Li and C. H. Liu, “Harmonic elimination pulse-width modulation techniques of real time inverter control for induction motor drives,” IEEE IECON, pp. 1391-1396, 1999. |
| 106. |
Y. S. Lai, “Sensorless vector-controlled induction motor drives using random switching technique for inverter control,” presented in the European Power Electronics Conference, 1999. |
| 107. |
T. P. Chen, Y. S. Lai, and C. H. Liu, “A new space vector modulation technique for inverter control,” IEEE PESC, pp. 777-782, 1999. |
| 108. |
Y. S. Lai, “Modeling and vector control of induction machines - a new unified approach,” Proceedings of the IEEE PES Winter Meeting, pp. 47-52, 1999. |
| 109. |
Y. S. Lai, “Investigations into the effects of PWM techniques on common mode voltage for inverter-controlled induction motor drives,” Proceedings of the IEEE PES Winter Meeting, pp. 35-40, 1999. |
| 110. |
S. S. Perng, Y. S. Lai, and C. H. Liu, “Sensorless vector controller for induction motor drives with parameter identification,” IEEE IECON, pp. 1008-1013, 1998. |
| 111. |
Y. S. Lai, H. C. Huang, Y. S. Kuan, and C. M. Young, “A new random inverter control technique for motor drives,” IEEE APEC, pp. 101-107, 1998. |
| 112. |
Y. S. Lai, and S. Bowes, “A novel harmonic elimination pulse-width modulation technique for static converters and drives,” IEEE APEC, pp. 108-115, 1998. |
| 113. |
S. S. Perng, Y. S. Lai, and C. H. Liu, “Sensorless control for induction motor drives based on new speed identification scheme,” Proceedings of the Power Conversion Conference, pp. 553-558, 1997. |
| 114. |
S. S. Perng, Y. S. Lai, and C. H. Liu, “A novel sensorless controller for induction motor drives,” Proceedings of the European Power Electronics Conference, Vol. 4, pp. 480-485, 1997. |
| 115. |
Y. S. Lai and S. R. Bowes, “A new sub-optimal pulse-width modulation technique for per-phase modulation and space vector modulation,” appear in IEEE PES Winter Meeting, 1997 ( PE-279-EC-0-01-1997 ). |
| 116. |
Y. S. Lai, C. N. Liu, K. Y. Chang, Y. C. Lo, C. I. Lee, and C. H. Liu, “Sensorless Vector Controllers for induction motor drives,” Proceedings of the IEEE PEDS, pp. 663-669, 1997. |
| 117. |
Y. S. Lai and S. R. Bowes, “A novel high frequency universal space vector modulation control technique,” Proceedings of the IEEE PEDS, pp. 501-507, 1997. |
| 118. |
Y. S. Lai and S. R. Bowes, “A universal space vector modulation based on Regular-Sampled pulse-width modulation,” Proceeding IEEE IECON‘96, pp.120-126, 1996. |
| 119. |
Y. S. Lai, Y. K. Lin and C. W. Chen, “New hybrid pulse-width modulation technique to reduce current distortion and extend current reconstruction range for three-phase inverter using only one current sensor,” Proc. of the 32th Symposium on Electrical Power Engineering, Dec. 2011. |
| 120. |
Y. S. Lai, B. Y. Chen, C. C. Hsu and G. J. Su, “Fully digital-controlled on-line UPS with sinusoidal output using only one micro controller,” Proc. of the 32th Symposium on Electrical Power Engineering, Dec. 2011. |
| 121. |
Y. S. Lan and Y. S. Lai, ”Design and implementation of digital-controlled resonant converter”, Proc. of the 10th Taiwan Power Electronics Conference, pp407-411, 2011. |
| 122. |
Y. C. Huang and Y. S. Lai, ”Design and implementation of resonant converter and digital-controlled power factor corrector”, Proc. of the 10th Taiwan Power Electronics Conference, pp412-417, 2011. |
| 123. |
K. M. Ho and Y. S. Lai, ”Design and implementation of digital-controlled power factor corrector for universal input voltage applications” , Proc. of the 10th Taiwan Power Electronics Conference, pp715-719, 2011. |
| 124. |
P. L. Kao and Y. S. Lai, “Design and implementation of bridgelesspower factor corrector”, Proc. of the 10th Taiwan Power Electronics Conference, pp726-731, 2011. |
| 125. |
C. Y. Yang and Y. S. Lai, “Design and implementation of two-stage AC/DC converter using only one DSP”, Proc. of the 10th Taiwan Power Electronics Conference, pp738-743, 2011. |
| 126. |
T. Y. Chen, Y. K. Lin and Y. S. Lai, “Design and implementation of vector-controlled PMSM drives with two-phase modulation”, Proc. of the 10th Taiwan Power Electronics Conference, pp506-510, 2011. |
| 127. |
D. S. Hsieh, Y. K. Lin and Y. S. Lai, “Design and implementation of brushless DC motor drives without shaft sensor”, Proc. of the 10th Taiwan Power Electronics Conference, pp633-638, 2011. |
| 128. |
C. H. Lo and Y. S. Lai “Design and implementation of grid-tied inverter with stationary-frame current control”, Proc. of the 10th Taiwan Power Electronics Conference, pp526-531, 2011. |
| 129. |
G. J. Su and Y. S. Lai, “Design and implementation of digital controlled interleaved power factor corrector”, Proc. of the 10th Taiwan Power Electronics Conference, pp775-781, 2011. |
| 130. |
W. S. Chen and Y. S. Lai, “Modular laboratory course design for learning magnetic component in power conversion applications”, Proc. of the 10th Taiwan Power Electronics Conference, pp799-804, 2011. |
| 131. |
Y. K. Lin and Y. S. Lai, “Pulse-width modulation technique for BLDCM drives to reduce commutation torque ripple without calculation of commutation time,” Proc. of the 9th Taiwan Power Electronics Conference, 2010. |
| 132. |
Y. K. Lin and Y. S. Lai, “Current reconstruction technique using one current sensor only for three-phase inverter,” Proc. of the 9th Taiwan Power Electronics Conference, 2010. |
| 133. |
L. S. Chen, C. A. Yeh, Y. S. Lai, “Design and implementation of single-phase inverter using digital signal processor,” Proc. of the 9th Taiwan Power Electronics Conference, 2010. |
| 134. |
C. H. Liang, Y. K. Lin, Y. S. Lai, “Design and implementation for sensorless PMSM drive based on microcontroller unit,” Proc. of the 9th Taiwan Power Electronics Conference, 2010. |
| 135. |
T. Z. Su, C. A. Yeh, Y. S. Lai, “Sensing methods for reducing standby power for fully digital-controlled full-bridge converter with phase-shift control,” Proc. of the 9th Taiwan Power Electronics Conference, 2010. |
| 136. |
J. J. Kuo and Y. S. Lai, “Design and implementation of fully digital-controlled boost converter and inverter for UPS applications,” Proc. of the 9th Taiwan Power Electronics Conference, 2010. |
| 137. |
H. W. Fang, C. A. Yeh, K. Y. Lee and Y. S. Lai, “Design and Implement of AC-DC Converter with PAM control for air condition,” Proceedings of the 29th Symposium on Electrical Power Engineering, 2008. |
| 138. |
D. B. Hsiao and Y. S. Lai, “Design and implementation of DSP-controller boost converter and inverter for UPS Applications,’’ Proc. of the 9th Taiwan Power Electronics Conference, 2010. |
| 139. |
Y. Y. Lee, Y. K. Lin and Y. S. Lai, “Design and implementation of vector-controlled drives for permanent magnet synchronous motor using microcontroller unit,” Proc. of the 8th Taiwan Power Electronics Conference, 2009. |
| 140. |
G. M. He C. A. Yeh and Y. S. Lai, “Design and implementation of digital-controlled power factor corrector,” Proc. of the 8th Taiwan Power Electronics Conference, 2009. |
| 141. |
L. B. Ke, and Y. S. Lai, “Design and implementation of interleaved LLC series resonant converter,” Proc. of the 8th Taiwan Power Electronics Conference, 2009. |
| 142. |
Y. H. Su, and Y. S. Lai, “Design and implementation of digital controller for phase-shift full-bridge converter,” Proc. of the 8th Taiwan Power Electronics Conference, 2009. |
| 143. |
Y. K. Lin and Y. S. Lai, “Dead-time elimination method and current polarity detection circuit without separate power sources for three-phase inverter,” Proc. of the 8th Taiwan Power Electronics Conference, 2009. |
| 144. |
H. L. Li and Y. S. Lai, “Design and implementation of digital controller with sliding-mode control for DC/DC buck converter,” Proc. of the 8th Taiwan Power Electronics Conference, 2009. |
| 145. |
Y. T. Chang and Y. S. Lai, “On-line parameter tuning technique for predictive current mode control operating in boundary conduction mode,” Proc. of the 8th Taiwan Power Electronics Conference, 2009. |
| 146. |
B. Y. Chen and Y. S. Lai, “Switching control technique of phase-shift controlled full bridge converter to improve efficiency under light load and standby conditions,” Proc. of the 8th Taiwan Power Electronics Conference, 2009. |
| 147. |
Y. K. Lin and Y. S. Lai, “Design and implementation of DSP-controlled single-stage forward converter with power factor correction,” Proc. of the 8th Taiwan Power Electronics Conference, 2009. |
| 148. |
H. C. Hsieh and Y. S. Lai, “Design and implementation of vector controller for induction motor drives,” Proc. of the 8th Taiwan Power Electronics Conference, 2009. |
| 149. |
P. W. Huang, B. Y. Chen, Y. T. Chang, and Y. S. Lai, “Design and implementation of digital controlled interleaved buck DC/DC converter,” Proc. of the 8th Taiwan Power Electronics Conference, 2009. |
| 150. |
Z. H. Yang and Y. S. Lai, “Design of Integrated Circuit of Pulse-Width Modulation Control for Three-Level Inverter,” Proceedings of the 29th Symposium on Electrical Power Engineering, 2008. |
| 151. |
X. Y. Chiang and Y. S. Lai, “Design and Implementation of FPGA-Based Single-Stage Flyback Converter,” Proceedings of the 7th Taiwan Power Electronics Conference, pp. 949-955, 2008. |
| 152. |
S. C. Wu and Y. S. Lai, “Design and Implementation of Full-Bridge Phase Shift Converter with Zero-Voltage Switching,” Proceedings of the 7th Taiwan Power Electronics Conference, pp. 1071-1076, 2008. (in Chinese) |
| 153. |
C. C. Wu and Y. S. Lai, “Design and Implementation of Digital Controller for Interleaved Two-Switch Forward Converter,” Proceedings of the 7th Taiwan Power Electronics Conference, pp. 956-962, 2008. (in Chinese) |
| 154. |
S. H. Lee, L. J. Kuan, Y. T. Chang, C. L. Tseng and Y. S. Lai, “Design and Implementation of DSP-Based DC-DC Converter,” Proceedings of the 7th Taiwan Power Electronics Conference, pp. 979-984, 2008. (in Chinese) |
| 155. |
S. C. Lee and Y. S. Lai “Design and Implementation of Interleaved Buck Converters with Synchronous Rectification ,” Proceedings of the 7th Taiwan Power Electronics Conference, pp. 1064-1070, 2008. (in Chinese) |
| 156. |
C. H. Lin and Y. S. Lai “Design and Implementation of Permanent Magnet Synchronous Motor Controller for Transmission System,” Proceedings of the 7th Taiwan Power Electronics Conference, pp. 985-990, 2008. (in Chinese) |
| 157. |
C. Y. Hou and Y. S. Lai “Study on the Driver of Buck Converter with Synchronous Rectification,” Proceedings of the 7th Taiwan Power Electronics Conference, pp. 1727-1732, 2008. (in Chinese) |
| 158. |
Z. J. Chuang, L. J. Kuan, W. S. Chen, C. R. Lin and Y. S. Lai “Design and Implementation of A Current-fed Full-bridge Boost Converter with Active Clamping Circuit ,” Proceedings of the 7th Taiwan Power Electronics Conference, pp. 1025-1030, 2008. (in Chinese) |
| 159. |
P. C. Chuang, Y. K. Lin and Y. S. Lai “Design and Implementation of Digital-controlled AC-DC Converter with PFC and Standby Power Reduction,” Proceedings of the 7th Taiwan Power Electronics Conference, pp. 677-682, 2008. (in Chinese) |
| 160. |
C. T. Kuo and Y. S. Lai “Design and Implementation of Digital Controller with Two-Degree-of Freedom Control for DC/DC Buck Converter,” Proceedings of the 7th Taiwan Power Electronics Conference, pp. 1101-1106, 2008. (in Chinese) |
| 161. |
S. Y. Su, K. Y. Lee and Y. S. Lai “Design and Implement of Phase-Shift Full-Bridge DC/DC Converter with Zero Voltage Switching,” Proceedings of the 7th Taiwan Power Electronics Conference, pp. 671-676, 2008. (in Chinese) |
| 162. |
P. Y. Lin and Y. S. Lai, “Vector-controlled induction motor drives with speed controller based upon fuzzy logic control,” Proc. of the 6th Taiwan Power Electronics Conference, 2007. |
| 163. |
C. H. Huang, Y. S. Lai, “Implementation of three-level inverters using field programmable gate array,” Proc. of the 6th Taiwan Power Electronics Conference, 2007. |
| 164. |
Y. C. Lin, K. Y. Lee, Y. S. Lai, “Development and implementation of power factor corrector with soft switching for universal input voltage applications,” Proc. of the 6th Taiwan Power Electronics Conference, 2007. |
| 165. |
H. Y. Hsu, K. Y. Lee, Y. S. Lai, “Design and implementation of digital-controlled power factor corrector for universal input voltage applications,” Proc. of the 6th Taiwan Power Electronics Conference, 2007. |
| 166. |
Y. K. Chou, Y. S. Lai, “Pulse-width modulation technique considering voltage balance of neutral point for diode-clamped three-level inverters,” Proc. of the 5th Taiwan Power Electronics Conference, 2006. |
| 167. |
Y. S. Lai, C. J. Lin and J. H. Zeng, "Analysis and design of resonant inverter/converter use Smith chart," Proceedings of the 2005 Taiwan Power Electronics Conference & Exhibition, pp.228-231, 2005. |
| 168. |
Y. T. Chang, Y. S. Lai, “Empirical study on radiated EMI for three-phase inverter,” Proc. of the 5th Taiwan Power Electronics Conference, 2006. |
| 169. |
H. Chang, Y. S. Lai, “AC driver and protection circuits for light emitting diode,” Proc. of the 5th Taiwan Power Electronics Conference, 2006. |
| 170. |
C. A. Yeh, Y. S. Lai, “Design and implementation of digital controller for DC/DC buck converter,” Proc. of the 5th Taiwan Power Electronics Conference, 2006. |
| 171. |
Y. S. Lai, K. Y. Lee and C. H. Lin, "Design and implementation of DC/DC converter with multiple outputs," Proceedings of the 2005 Taiwan Power Electronics Conference & Exhibition, pp.271-276, 2005. |
| 172. |
Y. S. Lai, J. H. Zeng, Y. C. Chen, T. L. Hsiao, and Y. C. Chang, "Design and implementation of power supply for driver with pulse amplitude modulation control, " Proceedings of the 2005 Taiwan Power Electronics Conference & Exhibition, pp.424-429, 2005. |
| 173. |
Y. S. Lai and K. Y. Lee, "Analysis and design of an AC/DC converter meeting standby speciation," Proceedings of the 2005 Taiwan Power Electronics Conference & Exhibition, pp.1066-1069, 2005. |
| 174. |
C. Y. Lee, F. S. Shyu and Y. S. Lai, “High efficient brushless DC motor drives without position sensor,” Proceedings of the 26th Symposium on Electrical Power Engineering, pp. 428-432, 2005. (in Chinese) |
| 175. |
Y. L. Wu, K. Y. Lee and Y. S. Lai, “Bidirectional AC/DC converter without DC link current sensor,” Proceedings of the 26th Symposium on Electrical Power Engineering, pp. 2166-2170, 2005. (in Chinese) |
| 176. |
C. J. Huang, W. H. Rao, F. S. Shyu, and Y. S. Lai, "Design of IC for brushless DC motor drive with phase locked loop speed control ," Power Electronics Conference pp.108-113, 2004. (in Chinese) |
| 177. |
C. W. Lin, Y. S. Lai, and F. S. Shyu, "Design and implementation of integrated circuit for brushless DC motor drive," Power Electronics Conference pp.365-370, 2004. (in Chinese) |
| 178. |
J. C. Hu, and Y. S. Lai, " Implementation of direct phase angle control for permanent magnet synchronous motor drive by field programmable logic array," Power Electronics Conference pp.371-375, 2004. (in Chinese) |
| 179. |
K. Y. Lee, and Y. S. Lai, "A novel magnetic-less bi-directional DC-DC converter for automotive power systems," Power Electronics Conference pp.768-772, 2004. (in Chinese) |
| 180. |
F. Y. Lin, Y. N. Lin, and Y. S. Lai, "Design and implementation of a cascaded converter with synchronous rectification," Power Electronics Conference pp.773-778, 2004. (in Chinese) |
| 181. |
Y. S. Lai, S. S. Tseng, and P. S. Chen, “FPGA-based implementation of random PWM technique with constant sampling frequency,” Proc. of the 2002 VLSI Design/CAD Symposium, pp. 447-451, August 2002. |
| 182. |
M. C. Kuo, Y. S. Lai, and C. C. Yeh, "Implementation of single-phase spindle drive," Proceedings of the 22th Symposium on Electrical Power Engineering, pp. 707-711, 2001. (in Chinese) |
| 183. |
R. T. Lee and Y. S. Lai, "Implementation of a three-phase spindle drive," Proceedings of the 22th Symposium on Electrical Power Engineering, pp. 883-887, 2001. (in Chinese) |
| 184. |
Y. C. Chen and Y. S. Lai, “Torque ripple control of permanent magnet brushless motor,” Proceedings of the Automatic Control Symposium, pp. 599-604, March, 2001 (in Chinese). |
| 185. |
S. G. Chen, F. C. Yu, and Y. S. Lai, "The start-up techniques for brushless PM motor," Proceedings of the 21th Symposium on Electrical Power Engineering, pp. 651-656, 2000. (in Chinese) |
| 186. |
C. H. Fan, F. C. Yu, and Y. S. Lai, "The implementation of a sensorless drive for permanent magnet synchronous motor," Proceedings of the 21th Symposium on Electrical Power Engineering, pp. 657-660, 2000. (in Chinese) |
| 187. |
F. C. Yu, Y. S. Lai, S. G. Chen, C. H. Fan, " Simulation and analysis of a flicker compensator," Proceedings of the 20th Symposium on Electrical Power Engineering, pp. 229-233, 1999. (in Chinese) |
| 188. |
F. S. Shyu, Y. S. Lai, S. A. Lii, W. J. Oh, and Z. H. Wu, "Implementation of a Voltage Source PWM-Controlled Multilevel Inverter," Proceedings of the 20th Symposium on Electrical Power Engineering, pp. 330-, 334, 1999. (in Chinese) |
| 189. |
M. G. Chang and Y. S. Lai, " Methods to reduce the effect of long motor leads on inverter-fed induction motors," Proceedings of the 20th Symposium on Electrical Power Engineering, pp. 325-329, 1999. (in Chinese) |
| 190. |
Y. T. Chang, J. S. Wang, Y. S. Lai, M. G. Chang, and M. H. Su, " Investigation into the possibility of the applications of high power inverter to air-conditioner for energy saving," Proceedings of the 20th Symposium on Electrical Power Engineering, pp. 289-293, 1999. (in Chinese) |
| 191. |
Y. S. Lai, T. W. Hwang, and J. H. Chen, ”Universal vector controller for induction motor drives,” Proc. of the 2nd Power Electronics and Motor Drives Conference, 1999. |
| 192. |
Y. C. Luo, C. H. Liu, and Y. S. Lai, “Direct torque control of induction motor with no influence of resistance variation,” Proceedings of the 19th Symposium on Electrical Power Engineering, pp. 1116-1120, 1998. (in Chinese) |
| 193. |
Y. C. Luo, C. H. Liu, and Y. S. Lai, “Direct torque control of induction motor with stator resistance adaptation,” Proceedings of the 19th Symposium on Electrical Power Engineering, pp. 1079-1083, 1998. (in Chinese) |
| 194. |
T. Y. Shihn and Y. S. Lai, “The implementation of sensorless AC drives based upon direct torque control using space vector modulation techniques for inverter control,” Proceedings of the 19th Symposium on Electrical Power Engineering, pp. 868-872, 1998. (in Chinese) |
| 195. |
T. Y. Shihn, Y. S. Lai, Y. C. Luo, and C. H. Liu, “The implementation of direct torque control inverter,” Proceedings of the 19th Symposium on Electrical Power Engineering, pp. 863-867, 1998. (in Chinese) |
| 196. |
S. S. Perng, C. H. Liu, and Y. S. Lai, “Sensorless control for induction motor drives with parameter identification,” Proceedings of the 19th Symposium on Electrical Power Engineering, pp. 853-857, 1998. (in Chinese) |
| 197. |
T. P. Chen, Y. S. Lai, and C. H. Liu, “Harmonic minimization of symmetrical sampling space vector modulation drive,” Proceedings of the 19th Symposium on Electrical Power Engineering, pp. 611-615, 1998. (in Chinese) |
| 198. |
S. S. Perng, C. H. Liu, and Y. S. Lai, “Speed sensorless control of induction motor with rotor resistance adaption,” Proceedings of the 18th Symposium on Electrical Power Engineering, pp. 570-574, 1997. (in Chinese) |
| 199. |
Y. S. Lai, “Harmonic elimination PWM techniques for inverter control,” Proceedings of the 18th Symposium on Electrical Power Engineering, pp. 93-98, 1997 |
| 200. |
Y. C. Luo, Y. S. Lai, T. Y. Shihn, and C. H. Liu, “Direct torque of motor drives using space vector modulation technique for inverter control,” Proceedings of the 18th Symposium on Electrical Power Engineering, pp. 401-405, 1997. (in Chinese) |
| 201. |
J. S. Wang, W. T. Ho, J. H. Jien, and Y. S. Lai, “Fuzzy control for servo system,” Proceedings of the Technological and Vocational Education Conference, Vol. II, pp. 299-306, 1997. (in Chinese) |
| 202. |
Y. S. Lai, N. W. Cheng and C. H. Liu, “The implementation of a sensorless controller based on stator-flux-oriented control using only current sensor,” Proceedings of the 17th Symposium on Electrical Power Engineering, pp. 294-296, pp. 299-300, 1996. |
| 203. |
Y. S. Lai, C. W. Chiu and C. H. Liu, “The development and implementation of a sensorless controller for induction motor drives,” Proceedings of the 17th Symposium on Electrical Power Engineering, pp. 289-293, 1996. |
| 204. |
116. T. P. Chen, C. H. Liu, and Y. S. Lai, “A new harmonic elimination technique,” Proceedings of the 17th Symposium on Electrical Power Engineering, pp. 142-146, 1996. |
| 205. |
Y. S. Lai, “A novel harmonic elimination pulse-width modulation technique,” Proceedings of the 17th Symposium on Electrical Power Engineering, pp. 127-131, 1996. |
| 206. |
Y. S. Lai and J. Wang, “Implementation of pulse-width modulation strategies using a digital signal processor,” Proceedings of the 11th Technological and Vocational Education Conference, Vol. II, pp. 39-48, 1996. |
| 專利 |
| 1. |
賴炎生，交流對直流升壓型轉換器切換控制方法，中華民國發明專利 I810081, July 21, 2023. |
| 2. |
賴炎生、黃詠奕、李峻宏、張豪傑，平板繞組變壓器，中華民國發明專利 I747508Nov. 21, 2021 |
| 3. |
賴炎生、 許志榮、林秉毅，伺服馬達驅動器裝置及其電流控制方法，中華民國發明專利 I717231，Jan. 21, 2021. |
| 4. |
賴炎生、游閔翔，電源轉換器及其控制方法，中華民國發明專利，October 18, 2019. |
| 5. |
賴炎生，游閔翔，具有諧振轉換器的電源暨其控制方法，中華民國發明專利，July 9, 2019. |
| 6. |
賴炎生，楊智嘉，直流交流變頻器，中華民國發明專利I613884，Feb. 1, 2018. |
| 7. |
賴建安，賴炎生，突波電流限制裝置及方法，中華民國發明專利I530070，April 11, 2016. |
| 8. |
賴炎生，劉邦佑，檢測電路及具有檢測電路的三相交流／交流功率轉換設備，中華民國專利M509904，Oct. 1, 2015. |
| 9. |
高橋使一，濱狄昌弘，賴炎生，功率因數改善裝置及其控制方法，中華民國發明專利I439037，May 21, 2015. |
| 10. |
許志榮，林秉毅，賴炎生，伺服馬達驅動器的控制系統，中國發明專利 CN102468800A，May 20, 2015. |
| 11. |
賴炎生等，零交越點偵測電路及採用此零交越點偵測電路之換相裝置，中華民國發明專利I435533，April 21, 2014. |
| 12. |
賴炎生，林詠凱，降低換相轉矩漣波的方法及裝置，中華民國發明專利I423579，March 1, 2014. |
| 13. |
許志榮，林秉毅，賴炎生，伺服馬達驅動器之控制系統，中華民國發明專利I423579，Jan. 11, 2014. |
| 14. |
賴炎生，林秉毅，三相交流感應馬達驅動器之控制系統及其弱磁控制方法，中華民國發明專利I420799，Dec. 21, 2013. |
| 15. |
Y. S. Lai, F. Takahashi and M. Hamaogi, "Power factor correction device and method with off time prediction for critical mode operation", US Patent, 8564992, Oct. 22, 2013. |
| 16. |
Y. S. Lai, W. H. Chang, P. C. Huang, H. Y. Chang, K. C. Lee, J. Y. Wang, Y. K. Wu, C. C. Chen, S. S. Jiang, and J. H. Chi, "Zero-crossing detection circuit and commutation device using the zero-crossing detection circuit ", US Patent, 8487571, Jul. 16, 2013. |
| 17. |
吳泓緯，蔡銘輝，賴炎生，馬達再生電壓抑制之裝置及其方法，中華民國發明專利I401863，July 11, 2013. |
| 18. |
賴炎生，陳柏元，相移全橋電源轉換系統及其控制方法，中華民國發明專利I394357，April 23, 2013. |
| 19. |
賴炎生，林詠凱，橋式轉換器／變頻器的電流極性偵測裝置及方法，中華民國發明專利I384230，Feb. 1, 2013. |
| 20. |
賴炎生等，零交越點偵測電路及採用此零交越點偵測電路的换相装置，中國發明專利 CN102882450A，Jan. 16, 2013 |
| 21. |
Y. S. Lai and P. Y. Lin, "Control system of three phase induction motor driver an field weakening control method thereof," US Patent, 8395336, Mar. 12, 2013. |
| 22. |
張奕然，賴炎生，電源轉換系統之驅動控制裝置及方法，中華民國發明專利I380561，Dec, 2012 |
| 23. |
Y. S. Lai and B. Y. Chen, “Shift full bridge power converting system and control method thereof," US Patent, 8295068, Oct. 23, 2012. |
| 24. |
賴炎生，李歌晏，功率因數修正器的輸入電壓估測方法及裝置，中華民國發明專利I371908, Sep. 1, 2012 |
| 25. |
Y. S. Lai and Y. T. Chang, Driving control device and method for power converting system, US Patent, 8080986, Dec. 2011. |
| 26. |
賴炎生，葉家安，自動換算電感參數供電源轉換系統驅動控制的方法及裝置，中華民國發明專利I371908，Nov. 1, 2011。 |
| 27. |
賴炎生，林秉毅，三相交流感應馬達驅動器之控制系統及其弱磁控制方法，日本特許 5314643，July, 2010 |
| 28. |
賴炎生，張璽，發光二極體之交流驅動及保護電路，中華民國發明專利I329851，Sep. 1, 2010 |
| 29. |
賴炎生，許勝發，消除中央處理器電源電路電感噪音的方法，發明專利第200727589，中華民國專利公報公告編號200727589，，民國96年07月16日。 |
| 30. |
賴炎生，李歌晏，直流-直流轉換裝置，發明專利第200605478號，中華民國專利公報公告編號200605478，民國95年09月1日。 |
| 31. |
賴炎生，田素成，徐福三，胡志強，同步馬達控制裝置與方法，發明專利第200536248號，中華民國專利公報公告編號200536248，民國94年11月1日。 |
| 32. |
賴炎生，林志融，李歌晏，應用在多相電力電子裝置之耦和電感，發明專利第200504768號，中華民國專利公報公告編號200504768，民國94年02月1日。 |
| 33. |
賴炎生，三相直流無刷馬達驅動器之控制方法，發明專利第I221355號，中華民國專利公報公告編號I221355，三十一卷第二十七期，民國93年09月21日。 |
| 34. |
賴炎生，徐福三，洪毓傑，林志融，電流模式控制之半橋式直流-直流轉換器之對稱責任週期的控制裝置，發明專利第I221351號，中華民國專利公報公告編號I221351，三十一卷第二十七期，民國93年09月21日。 |
| 35. |
賴炎生，徐福三，張永信，無感測器之無刷直流馬達控制系統，發明專利第00588505號，中華民國專利公報公告編號00588505，三十一卷第十五期，民國93年05月21日。 |
| 36. |
賴炎生，徐福三，曾紹顯，同步馬達之永久磁極起始位置偵測方法及其裝置，發明專利第00546913號，中華民國專利公報公告編號00546913，三十卷第二十三期，民國92年08月11日。 |
| 37. |
賴炎生，陳柏燊，陳文學，一種用於具有三蕊線的二孔插頭之中性線（水線）偵測裝置，發明專利第00545581號，中華民國專利公報公告編號00545581，三十卷第二十二期，民國92年08月01日。 |
| 38. |
賴炎生，王振興，王文科，具有減少交流驅動器之轉矩漣波與速度脈動的變頻器控制方法，發明專利第00466823號，中華民國專利公報公告編號00466823，二十八卷第三十四期，民國90年12月1日。 |
| 39. |
賴炎生，具有線上參數調適之無量測感應電機速度控制裝置及方法，發明專利第00441161號，中華民國專利公報公告編號00441161，二十八卷第十七期，民國90年06月16日。 |
| 40. |
賴炎生，具有減少電壓型反相器／轉換器共模電壓的脈波寬度調變控制裝置及方法，發明專利第00439350號，中華民國專利公報公告編號00439350，二十八卷第十六期，民國90年06月7日。 |
| 41. |
賴炎生，電壓型反相器／轉換器之脈波寬度調變控制裝置及方法，發明專利第00350170號，專利公報公告編號00350170，二十六卷第二期，民國88年01月11日。 |
|
|
